Please noticeThis AIO only supports Alpha and does not support BetaFlight

Alpha: https://gui.fettec.net/FC/index.html

Flight controllers that use Aphla are known to be the best for freestyling, for smoothness and reliability. Diatone is delivering on next-gen premium FPV parts, especially seen with the MK5 AIO. Capable of supporting up to 40 amps of power while working off metal mosfets, for better performance. You are going to want to put this on your next 3-4 inch freestyle ripper. 

Check out all our  and our full

 Features

• Metal Mosfets
• Comes with a User Manual with a Wiring Diagram
• PWM: 24~128K
• HD Compatible 

Specification

• Target Alpha
  
• MCU: 170MHz STM32G473
  
• GYRO: IIM-42652
  
• OSD: Yes
  
• Uarts: 4 Set
  
• Motor Signal:4 Set
  
• ESC Soft: Dshot300/600/1200/2400
  
• Power Led: Yes
  
• LED Controller: Yes
  
• AIR UNIT Port: Yes
  
• Buzz: Yes
  
• Input: 4~6S Lipo (14.8~25.2V)
  
• BEC Protection: Yes
  
• Receiver Protection: Yes
  
• TVS Protection: Yes
  
• BEC: 10V 2A& 5V 2A
  
• Mounting size: 25.5×25.5mm/M2
  
• Overall dimensions: 35×34.5×6.5mm
  

• Input: 4~6S Lipo (14.8~25.2V)f
  
• Continue Current: 40A×4
  
• Burst current: 45A (10S)
  
• TargetBLHeli_32 MAMBA F40_128K
  
• SOFT: Dshot300/600/1200/2400
  
• PWM:24~128K

Includes

• 1x Diatone Mamba MK5 G4 4-6S AIO Whoop/Toothpick Flight Controller w/ 40A 32Bit 4in1 ESC - DSHOT2400 
• 1x High Frequency 470uF/35V
  
• 1x AIR UNIT sh1.0 connector
  
• 2x 16AWG 60mm
  
• 1x AMASS Original XT60